PROP GUARD ® MEASUREMENT GUIDE

To obtain and select your Prop Guard®, please select from the chart below:
Prop Guard® Chart:
9 -XP Prop Guard® (Safety White) fits 5hp to 9hp
(Not available until Summer of 2012.)
9" Prop Guard® (Safety Yellow) fits 9.9hp to 20hp (except Big Foot & High Thrust, Require 11")
11" Prop Guard® (Safety Orange) fits 25hp to 35hp (except Big Foot & High Thrust, Require 13")
13" Prop Guard® (Safety Blue) fits 40hp to 65hp (except Big Foot & High Thrust, Require 14")
14" Prop Guard® (Safety Red) fits 70hp to 100hp (except Big Foot & High Thrust, Require 16")
16" Prop Guard® (Safety White) fits 110hp to 350hp
(All Stern Drives & Volvo Dual)

Fig. B

Prop Guards will fit all Manufacturers Outboards and Stern Drives. Note: All hp's with Big Foot & High Thrust applications require next size up.

All applications of the 9, 11, 13 and 14 inch Prop Guard are intended for vessels that do not exceed 35 mph at this time.

To obtain optimal performance out of your motor with the Prop Guard® installed, you may need to change your propeller diameter: 9" Prop Guard® up to 8.5" prop, 11" Prop Guard® up to 10.5" prop, 14" Prop Guard® up to 13.5" prop, and 16" Prop Guard® up to 16" prop.

The closer the prop blades are to the Prop Guard® rings, it will optimize your performance, handling and will not create a drag. Your motor will also have to be trimmed to a setting of optimal performance.

Be sure the Prop Guard® you purchase is the correct size. Place it on your motor with Grip Clamps first and CHECK YOUR CLEARANCES BEFORE DRILLING HOLES AND MOUNTING.

Manufacturer will not warrant your Prop Guard® should you drill into Prop Guard® and find you have purchased the wrong size.

Above all, please take your time in measuring and selecting the proper size Prop Guard®. Consult your Marine Dealer or bring your motor by for an inspection for proper size.

You're never in a hurry!

.


 Images and content may not be used for any purpose without written consent from Prop Guard